Network Intelligence
● LIVEPath Health — Fresh Complete 10m Loss
| Node | Connection | Internet | RTT | Loss | Stability | Freshness |
|---|
Diagnosis Engine
Nodes
Bulk Management Nodes
Default direct management network: 10.10.10.0/24. Existing nodes are not duplicated.
Manual Node
Connections
The three VAPS connection models below are created automatically. Internet path is detected live: EoIPv6/GREV6 follow the VM group (Upstream1/Upstream2); Upstream is detected as Iran or Upstream1/Upstream2 by checking the L2TP server /32 route via 10.10.10.1.
Default VAPS Models
| Model | Interface | Local / Source | Probe Server |
|---|---|---|---|
| Upstream | Upstream-{id} | 2.2.2.{id} | 2.2.2.1 |
| EoIPv6 | EoipV6-{id} | 6.6.6.{id} | 6.6.6.1 |
| GREV6 | GREV6-{id} | 7.7.{id}.2 | 7.7.{id}.1 |
Connection Models
Advanced: add another reusable model only when a new tunnel/connection type is introduced.
Stability & Quality
Each VM is grouped in one card. Paths are shown strictly by routing-table=Out Distance 1 → 2 → 3.
10-Minute Window Intelligence
Each measurement is a 5-packet ICMP batch. 10-minute slices contain hundreds of real packets; 30-minute packet loss drives switching and 60 minutes confirms recovery. Single isolated ping failures cannot trigger a route change.
Bandwidth Test
Download-only RouterOS bandwidth tests. remote-tx-speed=100M. Tests run sequentially with no overlap.
Connection Details
7-day historyAdvisory Decisions
Open recommendations are shown first. Decision Inspector shows every VM, all safety gates and the exact 30/60-minute evidence.
Decision Inspector
AUTO Actions
Incidents
Connection incidents resolve on recovery. All-path failures are collapsed into NODE/TELEMETRY incidents; legacy INTERNET: Dynamic incidents are automatically resolved.
Settings & Telegram
Bandwidth Test
One test at a time across the whole system. Download only, once per hour by default.